Level, sealed, and ready for daily traffic
Your garage floor handles vehicles, storage, spills, and temperature swings. We build performance-driven slabs with proper reinforcement, moisture protection, and clean finishes that make maintenance simple.
From single-car garages to full workshop builds, we handle demolition, grading, reinforcement, and finishing. Every project is engineered for Houstonβs expansive clay soil and high humidity.
4”-5” reinforced slabs for single and double garages with smooth trowel finishes and clean edges.
Heavy-duty slabs designed for shops, lifts, and equipment with rebar, thicker sections, and oil-resistant sealers.
Integrated vapor barriers, drainage channels, and waterproofing to protect finishes and stored items.
Precision finishing, control joints, and surface prep that ensure epoxy coatings bond and last.
Thickened edges, high PSI mixes, and custom drainage to support tall doors, RVs, and stacked parking.
Stamped borders, decorative aprons, and integrated driveway transitions that boost curb appeal.
We use moisture mitigation tactics that fight Houston humidity, reducing delamination and keeping coatings intact.
Laser grading ensures water flows toward the door or drains—not toward your walls or stored items.
Mix designs, rebar spacing, and joint plans are tailored to your vehicles, lifts, and long-term use.
We install garage floors across Houston, Harris County, and surrounding suburbs. Same-week scheduling is often available for:
Montrose, Heights, Midtown, and East Downtown garage remodels with limited access logistics handled for you.
Spring, Katy, Sugar Land, Pearland, and Cypress projects including new builds and replacement slabs.
Coordinated installs with HOA guidelines, permits, and builder punch-list support.
Garage retrofits, slab jacking, and structural upgrades for older homes needing modern performance.
Large format slabs, integrated drains, and thickened pads for barns, shops, and storage buildings.
Facilities for service vehicles, delivery fleets, and warehouse bays needing rugged, low-maintenance floors.
We review your current garage, take elevations, and map drainage paths. We document power, plumbing, and slab transitions that impact installation.
Existing concrete, coatings, and base materials are removed. We haul debris, leaving a clean workspace and protecting adjacent surfaces.
We regrade, compact the base, install vapor barriers, and set forms with control joint layout and transitions to the driveway or interior slabs.
Rebar, wire mesh, and dowels are placed for strength. We integrate sleeves for plumbing, EV chargers, and future lifts or drains.
We pour high-PSI concrete, screed, and trowel to the specified finish. Control joints are cut and edges are finished for a clean transition.
We apply curing compounds or sealers, provide maintenance guidance, and conduct a final walkthrough so you know exactly when the floor is ready for vehicles.
$7-$10/sq ft
$11-$15/sq ft
$16-$22/sq ft
Pricing includes demolition, prep, concrete, labor, and cleanup. Final cost depends on access, slab thickness, finish selections, and drainage requirements. Get a detailed estimate by requesting a free quote.
Most residential garages use a 4”-5” slab with steel reinforcement. Workshops, RV bays, or areas with lifts often need 6” or thicker with additional rebar. We recommend thickness based on your vehicles and equipment.
In some cases we can resurface, but most failing slabs need demolition for a long-term fix. Pouring over cracked or unlevel concrete can trap moisture and cause future failure. Weβll evaluate and advise the best option.
Light foot traffic is safe after 24 hours. We recommend waiting 7 days for cars and 14 days for heavy trucks or lifts to ensure the concrete reaches adequate strength.
Yes, especially in humid Houston. A vapor barrier helps prevent moisture from wicking up through the slab, protecting finishes and stored items. We include this in every garage floor build.
Absolutely. We trowel and finish the surface to epoxy manufacturer specs, cut control joints cleanly, and can return for grinding and coating when youβre ready to finish the floor.
Yes. We prepare drawings, secure permits when required, and provide documentation for HOA design review. Our team coordinates inspections and uses city-approved mix designs.
Repair cracks, settlement, or spalling garage slabs before damage spreads to walls and framing.
Learn More βProtect your new garage floor with premium sealers that resist oil, chemicals, and tire marks.
Learn More βAdd polished, stained, or epoxy finishes to your garage for a showpiece look with easy maintenance.
Learn More βLetβs build a garage floor that looks great and takes real abuse. Get a free, no-pressure quote today.