Professional Concrete Slabs in Houston

Thickness depends on the intended use. Garage and storage slabs are typically 4-6 inches thick. Equipment pads and foundation slabs may need 6-8 inches or more for heavy loads. We'll recommend the proper thickness based on your specific needs and Houston soil conditions.

Basic curing takes 7 days for light use and 28 days for full strength. We typically allow at least 48 hours before you can walk on it, and 7 days before vehicle traffic. We'll provide specific curing instructions for your project.

Permit requirements vary by location in Houston. Foundation slabs typically require permits. We handle permit applications and coordinate with the city to ensure your project is compliant with all codes and regulations.

Houston's expansive clay soil is a major consideration. We use proper grading techniques, adequate reinforcement, and control joints to prevent cracking from soil settlement. We may recommend moisture barriers and proper drainage to minimize soil movement impact.

Wire mesh (welded wire fabric) is lighter reinforcement, suitable for most residential slabs. Rebar (reinforcing steel bars) provides stronger reinforcement for heavy-duty applications. We select the best option based on your slab's intended use and load requirements.

Yes! We can often repair cracked or settled slabs through mudjacking (slab jacking), polyurethane injection, or epoxy repair. We'll evaluate the damage and recommend the most cost-effective solution for your situation.